Specifications
Table Of Contents
INTEGRATED AUDIO-VIDEO-CONTROL SYSTEMS
BeverlyHillsCityHall–TelevisionProductionAVCSystemsUpgrade
October15
th
,2012‐Page‐1
BEVERLY HILLS CITY HALL TV PRODUCTION SYSTEMS
AUDIO/VIDEO/CONTROL SYSTEMS – GENERAL SPECIFICATIONS
PART 1 GENERAL
1.1 RELATED DOCUMENTS
A. General Conditions and Division 01 Specifications apply to work of this specification. This
document is not a complete reference and must be reviewed in conjunction with the AV
system design drawings and documentation. AV contractor shall propose, design, engineer
and provide AV system upgrades based on the design intent documents, and with ongoing
consultation and coordination with the Owner.
1. AVC Design Intent Drawings – Oct 15, 2012 – from Electrosonic
2. AVC – Narrative – from Electrosonic
3. AVC Equipment List – Major Components
4. AVC Cut Sheets
5. AMX – Cabling for Success with DXLink
6. QSC – QLAN White Paper
7. QSC - QLAN Networking Overview
8. Available As Built Drawings (PDF):
a. Hoffman Final AV Drawings BEVERLY_HILLS__AS_BUILD – August 03, 2006
b. TV Pro Gear Drawings – Aug 15, 2008
c. Pro Sound Audio System Drawings - Aug 02, 2001
1.2 WORK INCLUDED (General Description)
A. The selected AV Contractor shall provide turnkey audio, visual and control systems for the
City of Beverly Hills Television Production AVC Systems Upgrade project. The project
address is 455 North Rexford Drive, Beverly Hills, CA 90210.
B. The AV Contractor shall provide all project management, design, engineering, supervision
and installation services necessary to provide a complete and working system including, but
not limited to, equipment, procurement, fabrication, system testing, commissioning, tuning
and training.
C. Cable and Conduit Infrastructure – The AV Contractor shall be responsible to supply and pull
all low voltage and high voltage audiovisual, network, and control cables. The AV Contractor
shall be responsible for all low voltage and high voltage terminations. The AV Contractor shall
verify Consultant’s design package for all facility cable call outs and provide engineered
drawings as required. The AV Contractor shall provide all cable engineering specifications,
documentation, terminations, connectors, terminal blocks, and similar devices required for the
work under this specification. The AV Contractor shall follow all signal level rules for audio
visual systems and shall avoid combining signal levels together where noise could be
induced into the system.
D. High Voltage - "High" voltage refers to electrical systems 100V and greater. The AV
Contractor (or their approved sub-contractor) is responsible for all high-voltage systems
including supplying and terminating all high-voltage connections to the AV Equipment.
E. The AV Contractor shall provide and install all connection plates. The AV Contractor shall be
responsible for all terminations.
F. The AV Contractor shall bid this project as specified.