Specifications
Table Of Contents

D ESIGN C ONSULTING
Electrosonic Systems, Inc. Page 11 of 11
Design Consulting DEC100167 www.electrosonic.com
3320 N. San Fernando Blvd. Beverly Hills City Hall Tel: +1-818-333-3600
Burbank, CA 91504, USA Television Production AVC Systems Upgrade Fax: +1-818-566-4923
shall follow suit for this project. The AV network shall be transporting QLAN traffic from
the new Qsys DSP system.
In addition to the Netlinx devices mentioned under Audio above, a new desktop 19.4”
panoramic AMX touch screen shall be installed and programmed.
Recommended
model: AMX MXT-1900L-PAN. The AMX system shall be programmed to enable
remote access to both the Council Chamber and Room A AV systems, as well as
access to Qsys enabling microphone channel adjustment. The intercom feature shall
also be enabled allowing for voice communication to the new AMX screens to be
installed in the Council Chamber and Room A. All current programmed AMX system
functions for the existing Control room touch screen shall be repeated and available in
the new system. The AMX system shall enable snapshot recall on the Yamaha 01V96I
(via MIDI).
Programming General Note:
As part of their scope, the AV Contractor shall “storyboard” their proposed AMX and
Qsys systems page layouts and functions for all three room systems in order that the
Owner can be involved in this process and provide early feedback to the Contractor.
The Owner would like to see a collaborative approach to this programming process.
The AV Contractor shall also include an allowance in their budget proposal for a return
visit to the project site, at a time after project handover to be determined, but perhaps
one month after sign off as an example, in order to make tweaks as necessary to the
programming based on Owner experience and feedback from having operated the
system on a daily basis.