Instruction manual

Web-Based Configuration Pages
21
IS-SPX-1000 & IS-SPX-1300 Inspired Signage XPress Players
Power Save
The Power Save tab of the Display Settings page enables users to configure the power settings on the chosen output
display for the IS-SPX Player.
FIG. 15 Administration - Display Settings - Power Save
Administration - Display Settings - Power Save
Display Power Save Settings:
Enable display power saving: Check to enable power saving options on the Signage monitor. The Use fixed schedule
for display power check box becomes valid for selection.
Check Use fixed schedule for display power to enable setting a schedule for monitor
display using the options below:
• Turn Monitor On - Set a time that the monitor turns on and starts displaying Signage
content, usually during business hours. Time entered is in a 24 hour format.
• Turn Monitor Off - Set a time that the monitor stops displaying Signage content and
powers off. Time entered is in a 24 hour format.
Select Apply to save changes.
Device Power Save
VGA output enable Use this dropdown menu to select whether the power mode for VGA output will be
Automatic, Always On, or Always Off.
Apply: Press this button to apply and save all changes.