Instruction manual

Installation

IS-SPX-1000 & IS-SPX-1300 Inspired Signage XPress Players

Installing the IS-SPX-MNT Mount Adapter

The optional IS-SPX-MNT Mount Adapter Kit (FG1231-17) is intended to allow attachment of the IS-SPX Player to

Vesa display wall mounts, thereby keeping it within easy reach for firmware uploads and other basic maintenance.

To install the IS-SPX-MNT Mount Adapter:

1. Select the side of the IS-SPX Player to which the adapter is to be installed. The IS-SPX-MNT may be installed to

either side of the device.

2. Using the supplied pan-head screws, attach the IS-SPX-MNT to the side of the IS-SPX Player.

3. Use the appropriate mounting holes to attach the assembly to the display wall mount.

Installing the NXA-AVB Breakout Box Mounting Bracket

The optional NXA-AVB Breakout Box Mounting Bracket Kit (FG1231-17) is intended to allow attachment of the IS-

SPX Player to solid surfaces such as desk tops, thereby keeping it within easy reach for firmware uploads and other basic

maintenance.

To install the NXA-AVB Breakout Box Mounting Bracket:

1. Select the side of the IS-SPX Player to which the adapter is to be installed. The mounting bracket may be installed

to either side of the device.

2. Using the supplied pan-head screws, attach the mounting bracket to the side of the device.

3. Use the mounting holes to attach the assembly to a fixed surface.

FIG. 6 Installation of the IS-SPX-MNT Mount Adapter (62-1231-03)

FIG. 7 Installation of the NXA-AVB Breakout Box Mounting Bracket (62-1231-03)

IS-SPX Player

IS-SPX-MNT Mount Adapter

Pan head screws

Mounting holes

IS-SPX Player

Mounting Bracket

Pan Head Screws

Mounting holes