Specifications

13 | P a g e
2.11 Lighting
The lighting requirements for each space are under the control of the Facilities Management Unit
(FMU), who will determine the equipment and integration required. For spaces that have projection
equipment special considerations must be made to ensure that any projection or screen surfaces
maintain a level of visibility that is conductive of their use. This involves careful selection and
placement of lighting systems as well as tight integration into the AV control system. All care must
be taken to prevent incidental light from spilling onto the projection surface.
Integration into existing lighting systems shall be determined during the design process and is
generally achieved through the use of C-Bus controllers that are passed commands by the AMX
control system.
2.12 Lecture Capture
Lecture capture facilities are required in many of the University’s teaching spaces. Provision in any
AV systems shall include additional video and audio feeds to lecture capture equipment as
determined during the design consultation process. ISTS will supply, install and maintain any Lecture
Recording device deployed to a teaching space.
2.13 External AV Input Plates
Suitable AV input plates shall be provided as specified by ISTS. The Contractor may supply an
alternative manufactured version of this plate type, with approval from ISTS required. All specified
input types on the plate must be engraved in black text.
2.14 Electrical Testing and Tagging
The Audio Visual Integrator is to have all supplied AV equipment including power leads, tested and
tagged by a licensed electrical equipment tester as per AS/NZ3760:2003 standards. The contractor
shall supply ISTS with the following on a USB memory stick.
1. Equipment type and serial number
2. Equipment location i.e. building room and number
3. Equipment test date
4. Name of tester