Specifications

Installation

MXD/T-1000 10.1" Modero® X Series Touch Panels

MXD-1000 Installation

The MXD-1000 may be installed directly into a solid surface environment, using either solid surface screws or

the included locking tabs for different mounting options. Once installed, the MXD-1000 is contained within a

clear outer housing known as the back box (FIG. 12). This back box is removed when installing the device into

a wall or into a Rough-In Box.

Installing the MXD-1000 into a wall

The MXD-1000 comes with a clear plastic backbox (designed to attach the panel to most standard wall

materials. This backbox has four locking tabs (two on top and two on bottom) to help lock the backbox to the

wall. These locking tabs are only extended AFTER the backbox is inserted into the wall. (FIG. 13 and

FIG. 14).

FIG. 12 MXD-1000 Back Box

Locking tabs

When installing the backbox, make sure that the assembly is in the correct position

and in the correct place. Once the locking tabs are extended and locked into place,

removing the backbox may be difficult without having access to the back of the wall

or causing damage to the wall.

For typical mounting surfaces, such as drywall, use the locking tabs as the primary

method for securing the back box to the surface. For thin walls or solid surfaces, use

mounting screws (not included).