Specifications

MXT-1000
6
MXD/T-1000 10.1" Modero® X Series Touch Panels
Connector Locations
With the unit facing you, the two USB ports for peripherals are located on the rear right corner of the device
(FIG. 3). The RJ45 connector for PoE, as well as a 5-pin Micro-USB port, is also located on the back of the
device.
In addition to its speaker, the MXT-1000 also utilizes its Micro-USB port for video output from camera video
and microphone output.
Memory
The MXT-1000 comes with 512 MB of SDRAM and 4 GB of Flash memory, neither of which can be
upgraded. A maximum of 2.4 GB is available to the user for projects.
Basic Operation
The MXT-1000 is operated using its integral touchscreen, as well as the Sleep button on the top of the device
(FIG. 1). If the device has gone into its Sleep Mode, a touch of the touchscreen or of the Sleep button will
reactivate it.
Powering on the MXT-1000
The MXT-1000 may be powered on by touching and holding the Sleep button on the top of the device.
Microphone
The MXT-1000 contains a built-in microphone above the touch screen for video and audio conferencing
capabilities. This microphone is concealed by the casing.
Audio/Video Capabilities
The MXT-1000 has the capability of displaying multiple JPEG and PNG files at one time. The device also
supports streaming motion JPEG video (of the sort used by many IP and Web cameras), as well as MP3 and
WAV audio files.
FIG. 3 MXT-1000 USB port location
Micro-USB
USB Ports
Entry for RJ45/
PoE Cable
Port
Speaker