Operation/Reference Guide Audio Controller LCD Keypads Flush-Mount LCD Keypad (DAS-KP-LCD-G) Surface-Mount LCD Keypad (DAS-KP-LCDS-W) Distributed Audio Last Revised: 3/03/2008
AMX Limited Warranty and Disclaimer This Limited Warranty and Disclaimer extends only to products purchased directly from AMX or an AMX Authorized Partner which include AMX Dealers, Distributors, VIP’s or other AMX authorized entity.
Table of Contents Table of Contents Matrix Audio Controller LCD Keypads ...............................................................1 Overview .................................................................................................................. 1 DAS-KP-LCD-G Flush Mount LCD Keypad (FG1120-0X) .................................................. 1 DAS-KP-LCDS-W Surface Mount LCD Keypad (FG1120-12) ............................................ 1 Audio Controller Keypads - Features By Model ....
Table of Contents ii Matrix Audio Controller LCD Keypads
Matrix Audio Controller LCD Keypads Matrix Audio Controller LCD Keypads Overview The Matrix Audio Controller LCD Keypads (FIG. 1) are compatible with both Delta and Mi Series Audio Controller Systems and provide Direct Access Control and advanced functionality such as: Setting and recalling Source Presets Setting and recalling Source Favorites Zone Grouping Alarm clock settings Keypad Lockout DAS-KP-LCD-G Flush Mount LCD Keypad DAS-KP-LCDS-W Surface Mount LCD Keypad FIG.
Matrix Audio Controller LCD Keypads Audio Controller Keypads - Features By Model The following table indicates the features supported by each of the Matrix Audio Controller Keypads: Audio Controller Keypads - Features By Model Model Name Description Features Flush Mount LCD Keypad • Direct access control LCD Keypads: • DAS-KP-LCD-G (FG1120-0X) • Setting/recalling presets • Setting/recalling favorites • DAS-KP-LCDS-W (FG1120-12) Surface Mount LCD Keypad • Zone grouping • Alarm clock settings • Keypad
Installing the Surface-Mount LCD Keypad (DAS-KP-LCDS-W) Installing the Surface-Mount LCD Keypad (DAS-KP-LCDS-W) Overview The DAS-KP-LCDS-W Surface Mount LCD Keypad (FIG. 1) is shipped completely assembled. To correctly install the DAS-KP-LCDS-W (retrofit) in the wall, you must remove the Front Bezel and the LCD screen. Please follow these instructions carefully to ensure correct installation and operation. FIG.
Installing the Surface-Mount LCD Keypad (DAS-KP-LCDS-W) 3. Plug the speaker-wire connectors to the “To Speakers” connector and plug the Zone wires into the “To Controller” connector on the back of the Keypad Connector Board. Ensure the wiring scheme is correct and that the connector at the Controller is plugged into the Zone output. 4. Use the provided screws to mount the Keypad Mounting Plate to the j-box in the wall.
Installing the Flush-Mount LCD Keypad (DAS-KP-LCD-G) Installing the Flush-Mount LCD Keypad (DAS-KP-LCD-G) Overview The DAS-KP-LCD-G Flush Mount LCD Keypad (FIG. 1) is shipped completely assembled. FIG. 1 DAS-KP-LCD-G Flush Mount LCD Keypad (Flushmount) Parts List • Front Bezel • LCD Touch-screen & Housing Before installing the LCD Keypads, POWER OFF the Matrix Controller (and Expansion Controllers, if applicable). 1.
Installing the Flush-Mount LCD Keypad (DAS-KP-LCD-G) 6. Carefully place the keypad bezel on the front of the Keypad. Start on one side making sure the volume button fits through the appropriate volume hole, and gently squeeze the cover to secure it to the other side of the housing. The second volume button may need to be pressed in order to fit through the appropriate volume hole. 7. POWER ON the controller (and Expansion Controllers, if applicable).
Customizing LCD Keypad Labels Customizing LCD Keypad Labels Overview Customization of labels displayed on the LCD keypad is done via the Setup menu on the front of the Controller. Both Source labels and Source Control labels can be customized (FIG. 1). Source Labels Source Control Labels FIG. 1 Source Labels and Source Control labels Customizing SOURCE Labels 1. Enter the Setup menu from the front of the Matrix Controller, by pressing the SELECT button (FIG. 2). FIG.
Customizing LCD Keypad Labels To delete a letter, use the << BACK button. Press the CENTER button to save the label. Source Names are limited to 6 characters. Customizing Source Command Labels 1. Enter the Setup menu from the front of the Matrix Controller, by pressing the SELECT button. 2. From the menu displayed, select SETUP / MRC / PROGRAM. 3. Select the source # of which you wish to customize the source command name. 4. Select "Learn IR". The first IR command for the source will be displayed. 5.
Using the LCD Keypads Using the LCD Keypads Basic Functionality (Mi Series & Delta) HOME Screen Source MAIN Screen Source MORE FIG. 1 Basic Functionality - Home, Source MAIN and Source MORE screens Turn On a Source (Single Room) Touch the desired source. The LCD screen will switch to the Source MAIN screen and the source will begin playing. An arrow will be displayed beside the source name to indicate that the source is ON (see FIG. 1).
Using the LCD Keypads Cable / Satellite To enter a specific channel, touch "NUMERIC" and enter the Channel # plus ENTER. Presets (Setting & Recalling) Source MORE Screen Set Preset Screen Recall Preset Screen FIG. 2 Basic Functionality - Setting and Recalling Presets Setting a Preset Presets can only be set from the Source MORE screen. 1. Access the Source MORE screen from the source MAIN screen by touching "MORE>>". 2. Touch "PRESETS". A numeric screen will be displayed. 3.
Using the LCD Keypads Advanced Functionality (Mi Series & DELTA) Advanced functions are accessed by simultaneously pressing & holding the Vol - / Vol+ buttons for 3 seconds. FIG. 3 shows the Advanced Functionality screen for KP-LCD Keypads. Room Grouping options Alarm Clock options Keypad Lock options Tone Control settings Backlight settings FIG. 3 KP-LCD Advanced Functionality screen Advanced Functionilty is largely reserved for Mi/Tango Controllers.
Using the LCD Keypads To adjust the Group Volume, Touch Vol - / Vol+ while on the Group screen. To adjust the Volume for an individual room, exit the Group screen, and touch Vol - / Vol+ from the keypad in each room. To clear a Group, access the Group Room screen and touch "Clear Group". Setting/Clearing the Alarm Clock FIG. 5 Alarm Clock options 1. To set an Alarm for a specific room, access the Advanced screen and select "ALARM CLOCK". 2. Select "Set Alarm". 3.
Using the LCD Keypads Tone Control Settings (Bass/Treble/Balance/SRS) Tone Control Screen FIG. 7 Tone Control Settings SRS/WOW is a registered trademark of SRS labs, Inc. Bass/Treble/Speaker Balance & SRS® can be adjusted for each room by accessing the Advanced screen and selecting "TONE CONTROL". SRS is supported only on Mi Series Audio Controllers. To adjust Bass touch BASS "+" or "-". To adjust Treble touch TREBLE "+" or "-". To adjust Speaker Balance touch BAL "" or "".
Using the LCD Keypads Backlight Settings FIG. 8 Backlight Settings The Intensity and Mode can be adjusted for the LCD keypad by accessing the Advanced screen and selecting "BACKLIGHT". To adjust Intensity, touch the % to increase/decrease the brightness of the screen (range = 5% - 95%). To adjust the Mode, touch the text to scroll through the following options: ALWAYS ON ALWAYS OFF AUTO ON (backlight turns off after 30 seconds) Privacy Mode To access Privacy mode: 1.
Using the LCD Keypads Privacy Mode - More screen Privacy Mode FIG. 10 Privacy Mode - More screen / Privacy Mode <
Using the LCD Keypads 16 Matrix Audio Controller LCD Keypads
Using the LCD Keypads KP-LCD Audio Controller Keypads 17
AMX. All rights reserved. AMX and the AMX logo are registered trademarks of AMX. AMX reserves the right to alter specifications without notice at any time. ©2008 3/08 It’s Your World - Take Control™ 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 USA • 800.222.0193 • 469.624.8000 • 469-624-7153 fax • 800.932.6993 technical support • www.amx.
