Specifications

Installation
17
MXD/T-1000 10.1" Modero X Series® Touch Panels
Installing the MXD-1000 into a wall
The MXD-1000 comes with a clear plastic backbox (designed to attach the panel to most standard wall materials. This
backbox has four locking tabs (two on top and two on bottom) to help lock the backbox to the wall. These locking tabs
are only extended AFTER the backbox is inserted into the wall. (FIG. 15 and FIG. 16).
When installing the backbox, make sure that the assembly is in the correct position
and in the correct place. Once the locking tabs are extended and locked into place,
removing the backbox may be difficult without having access to the back of the wall
or causing damage to the wall.
For typical mounting surfaces, such as drywall, use the locking tabs as the primary
method for securing the back box to the surface. For thin walls or solid surfaces, use
mounting screws (not included).
FIG. 15 Side view of MXD-1000 (Landscape)
FIG. 16 Side view of MXD-1000 (Portrait)
MXD-1000
(front)
Back box
Back box knockouts
Locking tab
Back box
knockouts
Locking tabs
MXD-1000
(front)
Sleep
Button