Specifications

Introduction
3
MVP-9000i 9" Modero® ViewPoint® Touch Panel with Intercom
MVP-9000i Specifications (Cont.)
Panel LCD Parameters: Screen resolution: 800 x 480 pixels (HV) @ 60 Hz refresh rate
Aspect ratio: 16 x 9
Brightness (luminance): 400 cd/m2
Channel transparency: 8-bit Alpha blending
Contrast ratio: 900:1 max.
Display colors: 16.7M colors (24-bit color depth)
Dot/pixel pitch: 0.246 mm
Panel type: TFT Color Active-Matrix (IPS technology)
Viewing angles:
Vertical: + 85° (up from center) and - 85° (down from center)
Horizontal: + 85° (left from center) and - 85° (right from center)
External Components
Stylus Slot: Slot where the included stylus is stored, located on the left side of the device.
MicroSD Card Slot: Slot for insertion of standard MicroSD memory cards.
Mini-USB Connector: 5-pin Mini-USB connector used for audio output to USB headphones,
programming, firmware updates, and touch panel file transfer between the PC
and the target panel.
Note: When connecting the panel to PC using a CC-USB (or compatible)
cable, be sure to power the panel On before attempting to connect the USB
cable from the PC to the mini-USB port on the panel.
DC power port: 2.5 mm port to power the panel away from a Docking Station.
Microphone: For use with the intercom feature and for calls using SIP.
Frequency: 20 to 160,000 Hz
S/N Ratio: More than 58 dB
Speaker: •4 Ohm
2 Watts 300Hz cutoff frequency
Audio Standards: G.711 sound standard
75dB SPL@1m
IR Emitters: Transmit IR (transmit only) over 20 feet (6.10 m) from the panel.
IR emitters on G4 panels share the device address number of the panel.
Transmits AMX fixed frequencies at 38KHz and 455KHz and third-party
user-programmable frequencies from 20KHz to 1.5MHz
Certifications: FCC Class B
•CE
•IC
VCCI
•C-Tick
Operating/Storage
Environment
Operating Temperature: 0° C (32° F) to 40° C (104° F)
Battery Charging Temperature: 0° C (32° F) to 30° C (86° F)
Operating & Battery Charging Humidity: 20% to 85% RH
Storage Temperature: -10° C (-14° F) to 60° C (140° F)
Storage Humidity: 5% - 85% RH
Included Accessories: MVP-9000i Installation Guide (93-5967-01)
PS3.0 Power Supply (FG423-30)
Stylus (pre-installed onto the left side of the unit)