Instruction manual

Device Configuration Software
41
Novara 3000 Series ControlPads Instruction Manual
Perform these steps to change the custom request and status names for RMS:
1. In the AMX DCS window, click the plus sign (+) beside Setup in the Content area. A list of setup options appear.
2. Click Interrogation. The Device Interrogation options appear (FIG. 49).
3. Click RMS/Settings. The Assign RMS Custom Request and Status Names window opens (FIG. 52).
4. Change the custom request or status name by clicking Custom Request Name or Custom Status Name beside the
default request or status name until a cursor appears, and enter the new name in the space provided.
5. Use the arrow buttons beside the Timeout/Time for Response option to set the response time, in seconds, for the
device.
6. Click Save.
Feedback
Feedback contains two options for your ControlPad: Buttons and Volume Bar. Click the plus sign (+) beside Feedback to
expand or collapse the available options.
Buttons
The Feedback option configures button feedback for the keypad. This allows you to program whether the button displays
specific information under a certain condition. For example, the button may change to a different color after it is pressed
to power on a device.
The following table lists the Buttons options:
FIG. 52 Assign RMS Custom Request and Status Names window
FIG. 53 Buttons options
Buttons Options
Button Feedback Enables you to select the button on ControlPad you want to use to provide feedback. You can also
click the button on the graphical representation of the ControlPad in the DCS window to select the
button for this option.