User Guide

ManualsBrandsAMX ManualsOtherCOLOR ACTIVE VIDEO TOUCH PANEL (G3 FIRMWARE)

Product Information

6" Color Video Touch Panels

The CV6T is designed to be used on any flat/level surface. The AC-CV6T (FIG. 2) is a metallic

tabletop enclosure that encases the CV6 touch panel and allows its use on a wide variety of

horizontal surfaces.

Specifications AXD-CV6 (Cont.)

Rear Connectors:

AXlink 4-pin bus connector for connection to the AMX Central Controller.

PWR +

12 VDC power supply; power is supplied through the bus or an external PSN power

supply.

RS-232 DB-9 male connector for data transmission or Microsoft

mouse control

Video BNC female connector (NTSC/PAL/SECAM)

Character Support: Unicode

character support for far-eastern languages such as Chinese.

• Characters for middle-eastern languages such as Arabic are not supported within

the Unicode fonts because they are bi-directional. Buttons with Unicode fonts can

only be created and edited using TPDesign3 and NetLinx Studio. Refer to the

respective manuals for additional information.

Compatibility: Axcess, NetLinx, and Landmark systems (AXlink is the most common control stan-

dard for this system).

Operating

Environment:

Indoor operation at temperatures between 0

º C (32º F) to 50º C (122º F) and a

humidity range of 5% to 90% RH (non-condensing).

Installation Kit: • 4-pin AXlink data/power connector

• 2-pin PWR connector

• Drywall clip set (2-drywall clamps and 2- #8 (2" long) screws)

• 4-#4-40 machine screws and threaded inserts

Enclosure: • Metal sub-plate and bezel with black or white matte finish

• Detachable magnetic front panel bezel

Installation Cutout: Cutout Template for the AXD-CV6 is available as drawing number 62-5924-06 and

inserted in the product packaging.

This file provides 1:1 cutout dimensions for the CV6 conduit/wallbox. For

replacement of the cutout, contact your AMX sales representative.

Optional

Accessories:

• AC-CV6T Accessory Tabletop (used to mount an AXD panel onto a tabletop

surface

• CB-CV6 Conduit/wallbox (includes flanges for installation to studs during the

construction phase). Conduit/Wallbox should only be mounted to a beam

before a drywall is installed (pre-wall).

• Optional spacers and bezels for international sales

• PSN2.8 Power supply (can be used to power the CV6)

• PSN6.5 Power supply (recommended to power the CV6)

FIG. 2 AC-CV6T Tabletop Enclosure views (CV6 unit within an AC-CV6T enclosure)

Front view

Rear view

Strain relief/cable

insertion location

Mounting blocks (2)