Operating instructions

Example 5: NON-LECTROSONICS MIXER
In this example, the TH3 is connected to a third-party
mixer, and both local and remote signals are amplified.
Note that the combined local and remote signal is
derived from the record out jack on the TH3. This is
valid and completely functional, but with this configura-
tion the TH3 must be powered on in order for the local
microphones to be audible through the sound reinforce-
ment system.
The LecNet anti-echo feature of the TH3 will not work
without a Lectrosonics mixer.
Example 6: NON-LECTROSONICS MIXER,
NO LOCAL SOUND REINFORCEMENT
In this example, the TH3 is connected to a third party
mixer, and only remote signals are amplified.
The LecNet anti-echo feature of the TH3 will not work
without a Lectrosonics mixer.
TELEPHONE
CODEC
+
OUTPUT
LEVEL
+
IN OUT
AUX
COARSE
LEVEL
+
FINE
LEVEL
RECORD OUT
MIC
LINE
REMOTE CONTROLS
OUTPUT
Microphone Mixer
TH3
INPUT
Sound Reinforcement Amplifier
RELAY
+
+
TELEPHONE CODEC
OUTPUT
LEVEL
IN OUT
AUX
COARSE
LEVEL
+
FINE
LEVEL
RECORD OUT
MIC
LINE
REMOTE CONTROLS
OUTPUT
Microphone Mixer
TH3
INPUT
Sound Reinforcement Amplifier
RELAY
8