Instruction manual
TABLE OF CONTENTS
SAFETY PRECAUTIONS 
Please read all instructions before attempting to unpack, install or 
operate this equipment and before connecting the power supply. 
Please keep the following in mind as you unpack and install this 
equipment:
• Always follow basic safety precautions to reduce the risk of fi re, 
electrical shock and injury to persons.
• To prevent fi re or shock hazard, do not expose the unit to rain, 
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any 
openings or empty slots in the unit, as you may damage parts 
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the 
PSU if it is damaged.
• Do not allow anything to rest on the power cabling or allow any 
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or 
openings in the unit housing that provide ventilation and allow 
for suffi cient space for air to circulate around the unit. 
DISCLAIMERS
The information in this manual has been carefully checked and 
is believed to be accurate. We assume no responsibility for any 
infringements of patents or other rights of third parties which may 
result from its use.
We assume no responsibility for any inaccuracies that may be 
contained in this document. We make no commitment to update or 
to keep current the information contained in this document.
We reserve the right to make improvements to this document and/
or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, 
transcribed, stored in a retrieval system, or any of its part translated 
into any language or computer fi le, in any form or by any means 
— electronic, mechanical, magnetic, optical, chemical, manual, or 
otherwise — without express written permission and consent
© Copyright 1997. All Rights Reserved.
Version 1.2 OCT 2013
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may 
be trademarks of the companies with which they are associated.
CONTENTS 
TABLE OF CONTENTS ......................................................1
PACKAGE CONTENTS .................................................... 1
FEATURES ....................................................................... 2
SPECIFICATIONS ............................................................ 2
TYPICAL HOOKUP AND OPERATION ............................ 3
INTRODUCTION
Congratulations on your purchase of one the most innovative 
CAT5 Transmitter/Repeater/Receiver product on the market 
Today. The SB-6210 is a transmitter its driving VGA signals over 
long lines by category cable to SB-6210R CAT5 repeater and 
receiver two in one unit. High performance for VGA (640x480), 
SVGA (800x600), XGA (1024x768), SXGA (1280x024), UXGA 
(1600x1200), WUXGA (1900x1200) driving with a ADC’s digital 
signal. Signals VGA and stereo audio with a maximum extension 
of 1000 ft. between transmitter and receiver. And use category 5 
cable. The terminators are RJ-45 (Category 5) jack and VGA HD-
15, Earphone jack.
PACKAGE CONTENTS
Check that you have the following components;
•  SB-6210 Transmitter or Repeater or Receiver
• Users Guide 
•  AC/DC Adapter: 12VDC, @300mA~660mA
AC/DC Adaptor Types : CE/UL/SAA/BS
1
-VGA : RGBHV
- Stereo Audio: AR, AL
Power Input: SB-6210T +12V DC@300mA-660mA
   SB-6210R +12V DC @300mA-660mA







