User Guide

ManualsBrandsAMX ManualsOtherCAFE DUET STANDARD NETLINX API (SNAPI) DEVICES

Standard NetLinx API (SNAPI) R 1.8.0

Audio Processor

IAudioProcessorComponent

IAudioProcessorComponentListener

IModuleComponent

IModuleComponentListener

IPowerComponent

IPowerComponentListener

Name: Audio Processor

Interface: IAudioProcessor

Audio Processor Functions

Name Component Channel Level Command Constant Notes

addAudioProcessorComponent(index,audio-

ProcessorAddress)

IAudioProcessorComponent AUDIOPROCADD-

Add a Audio Processor object at a given

index, where <index> is 1 through x and

<address> is the object address and x is

the maximum supported index (see specific

module documentation)

adjustAudioProcessorLevel(1) IAudioProcessorComponent 24 AUDIOPROC_LEVEL_UP Ramping Channel: Audio Processor level is

incremented when channel is activated

adjustAudioProcessorLevel(-1) IAudioProcessorComponent 25 AUDIOPROC_LEVEL_DN Ramping Channel: Audio Processor level is

decremented when channel is activated

cycleAudioProcessorPreset() IAudioProcessorComponent 209 AUDIOPROC_PRESET Momentary Function Channel: Cycle Audio

Processor preset when channel is acti-

vated

cycleAudioProcessorState() IAudioProcessorComponent 26 AUDIOPROC_STATE Momentary Function Channel: Cycle Audio

Processor state when channel is activated

getAudioProcessorComponentAd-

dress(index)

IAudioProcessorComponent ?AUDIOPROCADDR-

<index>

Query for the address of the Audio Proces-

sor object at index <index>, responds with

AUDIOPROCADDR-<index>,<address>

getAudioProcessorComponentIndex(audio-

ProcessorAddress)

IAudioProcessorComponent ?AUDIOPROCIDX-

Query for the index of the Audio Processor

object with address <address>, responds

with AUDIOPROCADDR-

getAudioProcessorCrosspoint(input,output) IAudioProcessorComponent ?XPOINT-

Query for Audio Processor crosspoint,

responds with XPOINT-

<value>,<input>,<output> where <value>

is 0 to 255, <input> is 1 to the maximum

supported input and <output> is 1 to the

maximum supported output (see specific

module documentation)

getAudioProcessorInput(output) IAudioProcessorComponent ?INPUT-<output> Query for the input connected to an output,

respond with SWITCH-

L<sl>I<input>O<output> where <sl> is

AUDIO and <input> is 0 if there is no con-

nection.