User Guide

Standard NetLinx API (SNAPI) R 1.8.0
326
Video Wall Functions (Cont.)
Name Component Channel Level Command Constant Notes
processDebugEvent(int) IModuleComponentListener DEBUG-<state> Debug state changed where <state> is 1-4
for ERROR, WARNING, DEBUG, INFO
processDeviceOnLineEvent(boolean) IModuleComponentListener 251 DEVICE_COMMUNICATING Feedback Channel: Communication is
established with device while channel is on
processPassbackEvent(byte[]) IModuleComponentListener When passback is on, each string received
form the device is sent to the NetLinx pro-
gram as a string. Use a DATA_EVENT
event with a STRING handler to caputre
the data from the device.
cyclePower() IPowerComponent 9 POWER Momentary Function Channel: Cycle power
when channel is activated
setPower(ON) IPowerComponent 27 PWR_ON Momentary Function Channel: Power is
turned on when channel is activated
setPower(OFF) IPowerComponent 28 PWR_OFF Momentary Function Channel: Power is
turned off when channel is activated
setPower(ps) IPowerComponent 255 POWER_ON Discrete Function Channel: Power is on
while channel is active
setPowerSensor(nld,nIOChan) IPowerComponent IOLINK-<dps>,<chan-
nel>
Associate a Power Sensor with the device
where <dps> is the DPS in string form, i.e.
17:1:0, and <channel> is the channel on
the IO device to which the power sensor is
connected.
processPowerEvent(ON) IPowerComponentListener 255 POWER_FB Feedback Channel: Power state changed,
power is on while channel is on
getVideoWallConfiguration() IVideoWallComponent ?VWALLCONFIG Query for video wall configuration,
responds with VWALLCONFIG-<config>
queryVideoWallConfigurationList() IVideoWallComponent ?VWALLCONFIGLIST Query for the list of available Video Wall
Configurations, responds with multiple
VWALLCONFIGLIST-<config> commands,
one for each valid configuration
saveVideoWallConfiguration(sConfig) IVideoWallComponent VWALLCONFIGSAVE-
<config>
Save video wall configuration where <con-
fig> is the configuration name
setVideoWallConfiguration(sConfig) IVideoWallComponent VWALLCONFIG-<con-
fig>
Recall video wall configuration where <con-
fig> is the configuration name
processVideoWallConfigurationEvent(String) IVideoWallComponentListener VWALLCONFIG-<con-
fig>
Video wall configuration changed, where
<config> is the configuration name
processVideoWallConfiguration-
ListEvent(String[])
IVideoWallComponentListener VWALLCONFIGLIST-
<config>
Response to Video Wall configuration list
query, responds with multiple VWALLCON-
FIGLIST-<config> commands, one for each
valid configuration