Technical information

STEP BY STEP ASSEMBLY

OF THE FMS AND SHUTTLE TRACK

Now reposition the end pulley onto the track Place the metal FMS clip inside the track,

an fasten the screw. put the motor pulley on the track again and

place the metal clip over the motor pulley, to

ensure a good fixation.

Now tighten all the In order to ensure a smooth running of all the components inside the

screws of the motor track, it is necessary to lubricate the track, the pulleys and the master

pulley again. carriers with the special Forest lubrication spray.

Finally, position the FMS carriers onto the The basic assembly of the track is now

track and click them into the track, by using complete, the system is ready to be installed

your thumbs. Remove the plastic strip. with the motor.