Technical information

TECHNICAL INFORMATION FMS MOTOR

SPECIFICATIONS FMS MOTOR:

 Torque: 0.8 / 1.2Nm / 1.8Nm (30 / 45 / 60Watt)

 Speed: 100rpm ≈ 15cm/sec

 Voltages: 110Vac – 60Hz / 230Vac – 50 Hz

 Operating temperature: 0-50°C / 32-122°F

 Max. runing time: 5 minutes

 Weight per carrier: 1,0kg – max. 10kg/mtr

 CE / FCC / UL approval

SPECIFICATIONS TRACK:

20mm

 Weight: 303 gr/mtr (3.25 ounce/ft)

 Size: 20x20mm (0.79x0.79 inch)

 Material: Aluminium extrusion 6063 T5 20mm

 Finish: Powder coated, lubricated

 Available lenghts: 5.80mtr and 7.00mtr

BENDING/CURVING:

The FMS motor can be used in a track with one or two bends of 90 degrees. The track can be curved and

reversed curved in any horizontal direction with a radius of 20cm (8 inch). Bends with a larger radius and

continuous curves can be made with the electrically powered bending tool.

min. 55cm (2110/16”)

30cm (1ft.) min. radius 50cm (1911/16”)

LOAD TABLE (with carriers):

45 Watt

30 Watt

60 Watt