Technical information

FOREST MULTI RECEIVER / WALL SWITCH – 5201001360 / 1 / 2

TECHNICAL SPECIFICATION:

● powered by Shuttle ● connect to port 1 of the Forest Shuttle

● can also be used as wall switch ● can control several Shuttles parallel

● cable 0,5mtr → 5201001360 ● working temperature -10°C - +50°C

● cable 3,5mtr → 5201001361 ● works on Forest Multi Remote and

● click-on → 5201001362 Forest Multi Wall Switch RF

program button

program button control led

open/up button

stop button

close/down button

PROGRAMMING REMOTE / WALL CANCEL ONE CHANNEL OF DELETE ALL PREVIOUS

SWITCH TO RECEIVER: REMOTE / WALL SWITCH PROGRAMMED REMOTES /

WALL SWITCHES:

press program button, led will blink press program button, led will blink press stop and close button of

receiver for ~6 sec.

or or

press stop button press stop button led will blink and will go off

press program press program

button, led will button, led will

light up light up

hold the remote/wallswitch within

0,5 mtr from receiver. Select channel or

(1-15) and press open button: select channel and press close button:

led must blink 3 times and will go off led will blink and will go off

press and hold the program button

for 10 seconds until led starts blinking

11/2013 WDOC SHUTTLE MULTI RECEIVER www.forestgroup.nl