Technical information

TECHNICAL INFORMATION SHUTTLE MOTOR

SPECIFICATIONS SHUTTLE MOTOR:

 Maximum torque: 1,5Nm

 Maximum speed: 100rpm ≈ 15cm/sec

 Current draw at max. torque: 2,7A at 24 Vdc

 Operating temperature: 0-50°C / 32-122°F

 Weight per carrier: 1,0kg – max. 10kg/mtr

 CE / FCC approved

SPECIFICATIONS ADAPTOR:

 Input: 100-240Vac – max.1,5A - 50-60Hz

 Output: 24Vdc - 2,7A

 CE / FCC / UL / TÜV

 Efficiency level V

SPECIFICATIONS TRACK:

20mm

 Weight: 303 gr/mtr (3.25 ounce/ft)

 Size: 20x20mm (0.79x0.79 inch)

 Material: Aluminium extrusion 6063 T5 20mm

 Finish: Powder coated, lubricated

 Available lenghts: 5.80mtr and 7.00mtr

BENDING/CURVING:

The Shuttle motor can be used in a track with one or two bends of 90 degrees. The track can be curved

and reversed curved in any horizontal direction with a radius of 20cm (8 inch). Bends with a larger radius

and continuous curves can be made with the electrically powered bending tool.

min. 55cm (2110/16”)

30cm (1ft.) min. radius 50cm (1911/16”)

LOAD TABLE (with carriers):