Instruction manual

Executing Presets
11
Instruction Manual – BCS Basic Control Structure Protocol
To execute a local preset:
1.
Enter the Execute Local Preset command below. Replace the “#”s with the level and local preset
number(s).
RL#P#T
Execute Local Preset Examples
Global Presets
A global preset is a snapshot of a system’s routing state. The routing state is all routings on all levels
(including audio settings) for all enclosures in a system. Once the system state has been captured with an
“RR” Define Global Preset command, it can then be restored at any time with the “R” Execute Global
Preset command. Global presets cannot be defined in XNConnect.
Note: We strongly recommend keeping track of the numbers and the system state routings used for
each global preset. If another system state is assigned to a previously used number, the former state
will automatically be overwritten.
To define a global preset:
1.
Route the system to the desired state and enter the Define Global Preset command below.
Replace the “#” with the global preset number.
RR#T
It may take several seconds for the
“T” to appear, depending on the type and size of the system.
Define Global Preset Examples
To execute a global preset:
1.
Enter the Execute Global Preset command below. Replace the “#” with the global preset number.
R#T
Execute Global Preset Examples
Note: Status is not invalidated by global presets.
BCS Command Action
RL0P2T
Executes Local Preset 2 on Level 0
RL1P12T
Executes Local Preset 12 on Level 1
RLP7T
Executes Local Preset 7 on the default level (defined in configuration file, normally 0)
RL3P1 2T
Executes Local Presets 1 and 2 on Level 3
RL3 1P1T
Executes Local Preset 1 on Level 3 and Local Preset 1 on Level 1
BCS Command Action
RR1T
Defines the current system state as Global Preset 1
RR3T
Defines the current system state as Global Preset 3
RR5X
Cancels the incomplete command
BCS Command Action
R1T
Executes Global Preset 1
R3T
Executes Global Preset 3
R2X
Cancels the incomplete command