Specifications

Overview
2
Enova AVX-400 Cat5 Presentation Switcher Operation/Reference Guide
AVX-400 Cat5 Presentation Switcher Specifications (Cont.)
Front Panel Components:
Source Select Button 1 button for toggling through the 4 inputs with each press
Source Select LED Indicators 4 LED indicators which show which source has been selected
Source Inputs (INPUTS 1-4) 4 RJ-45 connectors for source audio and video
Front Panel Components:
LINE IN Auxiliary Audio Input 1 3.5mm Phoenix (5-pin) connector for use with external audio equipment
such as radio microphones and mixers.
AxLink Device DIP Switches 1 set of 8 DIP switches for setting the address of an AxLink device
AxLink Port 1 3.5mm Phoenix (4-pin) connector that provides data to external control
devices and allows the AVX-400 to be controlled from a Master. A green
AxLink LED indicates the state of the AxLink port.
Note: The AVX-400-SP cannot be powered by this port or use the port to
power other devices.
RS-232 Control Port 1 3.5mm Phoenix (3-pin) connector that provides data to external control
devices and allows the AVX-400 to be controlled from RS232 controller.
Configuration Port (PROG) 1 type-B USB connector for configuring the switcher via DCS software.
Power Connector 1 3.5mm Phoenix (2-pin) connector
Rear Panel Components:
RS-232 Display Control 1 male DB9 connector used to control a projector or display from the
AVX-400-SP
Audio Amplifier Output 1 5.0mm Phoenix (4-pin) connector capable of delivering 2x10W into 8 ohm
variable stereo audio amplifier.
Line Level Audio Output 1 3.5mm Phoenix (5-pin) connector provides the mixed audio at Line Level
Composite Output 1 RCA (Y) connector for connecting to a display device
VGA/RGB Output 1 HD-15 connector for connecting to a display device
Component Output 1 HD-15 connector for connecting to a display device. You can use breakout
cable CC-HD15M-RCA3M (FG10-2170-03) to connect to 3 x RCA Phono
Sockets.
Operating Environment: Storage Temperature: -10º C to 70º C (14º F to 158º F)
Operating Temperature: 0º C to 40º C (32º F to 104º F)
Operating Relative Humidity: 5% to 85% non-condensing
Dimensions (HWD): 1.75" (4.45cm) x 9" (22.86cm) x 6" (15.24cm) HWD
Weight: 2.57 lbs (1.17 kg)
Certifications: FCC Class B, CE, and IEC60950
Included Accessories: • 2 5-pin 3.5mm Phoenix connectors, for line-in/out (41-0336)
• 1 4-pin 3.5mm Phoenix connector, for AxLink (41-5047)
• 2 2-pin 5 mm Phoenix connectors, for speakers (41-0158-SA)
• 1 RS-232 3-pin 3.5mm Phoenix connector (41-0338)
• 1 PSN4.4, Power Supply, 4.4A, 3.5mm Phoenix, 13.5VDCA5 (FG423-45)
• Enova AVX-400 Presentation Switcher Installation Guide (93-1350-01)
• 1 Suppression Ferrite (04-0018-SA)
Optional Accessories: • UPX-CN+A Component Universal Transmitter Wallplate (FG1402-52)
• UPX-CS+A Composite Universal Transmitter Wallplate (FG1402-50)
• UPX-RGB+A RGB Universal Transmitter Wallplate (FG1402-51)
• Surface Mount Kit (KA2250-40) with mounting bracket (62-2254-02)
• SP-08-AX 8-Button Keypad with AxLink (FG1311-08)
• CC-HD15 Male to HD-15 Male cable (FG10-2170-01)
• CC-HD15 Male to 3 RCA3 Male cable (FG10-2170-03)