Specifications

Overview
1
Enova AVX-400 Cat5 Presentation Switcher Operation/Reference Guide
Overview
The Enova AVX-400 Cat5 Presentation Switcher (FG1350-01) is a four input, multi-format active
presentation switcher with auxiliary line level audio input. The AVX-400 (FIG. 1) is a Cat5 switcher with basic
projector/display control via RS-232, but with external control of the switcher via RS-232 or AxLink. This
presentation switcher incorporates the following:
 External serial or AxLink control
 Projector or display control via RS-232
 Integrated multi-format Cat5 audio/video switcher
 Audio mixer with an auxiliary line input facility
 Audio volume and tone control
 Built-in audio amplifier
The presentation switcher presents the respective output for the VGA/RGB, component, and composite video
sources. All sources remain in their native formats and resolutions. The selected video source is presented with
its related audio, and mixed with the auxiliary line input. Master volume of the program sound is available for
adjustment by external control.
The system is suitable for use within a 1-50m range (3.2'-150'). There is control for video gain and video
equalization for each input to compensate for cable length and allow optimization of each source. The
switchers contain a stereo 10W per channel built-in audio amplifier with 7-band graphic equalization.
Specifications
The following table lists the specifications for the presentation switcher:
FIG. 1 Enova AVX-400 Cat5 Presentation Switcher (front and rear panels)
AVX-400 Cat5 Presentation Switcher Specifications
Power 12VDC, 4.4A supply
See the Power Connector section on page 9 for information about current
draw.
Audio Amplifier Stereo 10W per channel with 7-band graphic equalization
Enclosure Metal with black matte finish
Front panel
Rear panel