Specifications

Programming
30
Enova AVX-400 Cat5 Presentation Switcher Operation/Reference Guide
Serial Commands (Cont.)
TON-
Decrease the tone
band by 0.5dB
The specified tone band decreases by 0.5dB.
Syntax:
TON<band>-
Variable:
band = tone band (1-7): (1=100Hz, 2=250Hz, 3=500Hz, 4=1KHz, 5=2.5 KHz, 6=5KHz,
7=10KHz)
Example:
TON6-
Decreases the 5KHz tone band by 0.5dB.
UMT
Turns off the
audio/video mute
Syntax:
UMT
VEQ
Sets the video EQ
for the source
input
Syntax:
VEQ<input>=<eq>
Variable:
input = source input (1-4)
eq = the EQ level setting between 0 and 100
Example:
VEQ4=25
Sets the EQ level on source input 4 to 25%.
VEQ?
Queries the video
EQ values for all
inputs
Returns all video EQ values for all source inputs.
Syntax:
VEQ?
Sample Output:
1=25
2=35
3=50
4=0
VGN?
Queries the video
gain values for all
inputs
Returns the video gain values for all source inputs.
Syntax:
VGN?
VLA
Set amp volume
Sets the amp volume to a specified setting in decibels.
Syntax:
VLA=<volume>
Variable:
volume = the amp volume level setting between -100 and 24dB
Example:
VLA=20
Sets the balance out volume level to 20dB.
VLA+
Increase amp
volume by 0.5dB
Syntax:
VLA+
VLA-
Decrease amp
volume by 0.5dB
Syntax:
VLA-