Specifications

Programming
29
Enova AVX-400 Cat5 Presentation Switcher Operation/Reference Guide
Serial Commands (Cont.)
MUT
Toggles the audio/
video mute
Syntax:
MUT
RGN
Sets the red gain
level for a source
input
Syntax:
RGN<input>=<gain>
Variable:
input = source input (1-4)
gain = the red gain level setting between 0 and 100
Example:
RGN3=75
Sets the red gain level on source input 3 to 75%.
SMT
Turns on the
audio/video mute
Syntax:
SMT
SSW
Simulates
pressing the
select switch
Pressing the source select button activates the next valid source input. This command
simulates a single pressing of the source select button on the presentation switcher.
Syntax:
SSW
TON
Set tone band to
specific setting
Set an individual tone band to a specified level.
Syntax:
TON<band>=<level>
Variable:
band = tone band (1-7): (1=100Hz, 2=250Hz, 3=500Hz, 4=1KHz, 5=2.5 KHz, 6=5KHz,
7=10KHz)
level = the decibel level setting between -20 and 20
Example:
TON4=-6
Sets the 1KHz tone band to -6dB.
TON?
Queries the
current tone band
settings
Returns the current tone band settings.
Syntax:
?TON
Sample Output:
1=18dB
2=10dB
3=2dB
4=-6dB
5=1dB
6=10dB
7=15dB
TON+
Increase the tone
band by 0.5dB
The specified tone band increases by 0.5dB.
Syntax:
TON<band>+
Variable:
band = tone band (1-7): (1=100Hz, 2=250Hz, 3=500Hz, 4=1KHz, 5=2.5 KHz, 6=5KHz,
7=10KHz)
Example:
TON3+
Increases the 500Hz tone band by 0.5dB.