Specifications

Configuration
24
Enova AVX-400 Cat5 Presentation Switcher Operation/Reference Guide
The following options appear on this window:
Perform these steps to update the firmware for your device:
1. From the File menu, select Enova Firmware Update. The Enova Firmware Update window opens
(FIG. 35).
2. Click Go to AMX.com. A web browser opens and navigates to www.amx.com.
3. Click Tech Center on the main page at AMX.com.
4. Locate and download the latest firmware version (.bin) for your device. Make note of the location to
which you save the firmware file. When the download is complete, return to the Enova Firmware update
window.
5. Click Select File, navigate to the location the firmware file was saved, and select the file.
6. Click Update. The firmware for the device is updated with the latest version.
7. Click Close to close the window and return to the AMX DCS window.
Enova Firmware Update Window Options
Go to AMX.com Click to open a browser and navigate to AMX.com. At AMX.com, you can
download the latest firmware for the device.
Current Firmware Version Displays the current firmware version for the device. This information is
view-only.
Device Model The device model of the unit you are updating. This information is view-only.
Select File Click to browse and locate the latest firmware file on a local or network drive.
Loaded File The latest firmware file. This information only appears after you select firmware
file to use for updating. This information is view-only.
File Size The size of the loaded firmware file. This information is view-only.
Update Click to begin updating the firmware for the device.
Status The current state of the firmware update process. This information is view-only.
Bytes Updated The current number of bytes of data that have been updated. This information
is view-only.
Cancel Update in Progress Click to cancel the current firmware update. This button is only active when a
firmware update is in progress.
Close Closes the window.