Specifications

Configuration
20
Enova AVX-400 Cat5 Presentation Switcher Operation/Reference Guide
Adding a Device to the Device Library
If the provided device library does not contain the device you are using, you can add the device to the library
manually. Perform the following steps to add a device to the device library:
1. From the File menu, select Device Manager Library. The Device Library Manager window opens.
2. In the Device Selection area, click the Add button. The Add Device dialog box opens (FIG. 32).
Device Library Manager Options (Cont.)
Device Definition
Selected Model The name of the selected device. This information is view-only.
Communications Type The type of connection for the device. A different set of commands can be
saved for each communication type. RS-232 and IP communications have a
commands and status section whereas Infrared has only a command section.
RS-232 is the only option available for the AVX-400 presentation switcher.
Serial Connection Settings Displays the Baud Rate, Data Bits, Data Format, Flow Control, Parity, and Stop
Bits for the device. You can change most of these options, if necessary. You
cannot change any field that appears dimmed.
Cmd Data (ASCII) When you select a record from the commands/status table, this field shows the
ASCII representation of the data. This information is view-only, however, you
can select and copy the information.
Commands Lists the available executable commands for the current device. If the device
has a compatible hexadecimal value for an individual command, the
hexadecimal value appears in the Data column. You can enter a value for each
command in the Data column, if available. Consult the manual included with
your device for more information.
Status Lists the available status commands for the current device. If the device has a
compatible hexadecimal value for an individual command, the hexadecimal
value appears in the Data column. You can enter a value for each command in
the Data column, if available. Consult the manual included with your device for
more information.
Add Adds a space for a new command in the above list. You can add the name of
the command and its hexadecimal value in the Name and Data fields,
respectively.
Delete Deletes the selected command.
Cut Removes the selected command from the command list and stores its
information on the local clipboard for copying.
Copy Copies the selected command to the local clipboard for later retrieval.
Paste Inserts the data on the local clipboard into the selected location.
FIG. 32
Add Device dialog box