Specifications

Configuration
15
Enova AVX-400 Cat5 Presentation Switcher Operation/Reference Guide
Configuration
AMX DCS Software
You can configure the AVX-400 and its functionality by using AMX DCS software (FIG. 28). The top of the
window displays the device image of the front panel of the Enova AVX-400, and displays which inputs are
valid by highlighting the source input. Clicking on a highlighted port on the device image changes the active
input. The active source input is indicated by the illuminated red LED beside the source input.
The bottom half of the window features the Device Setup options. The Device Setup area consists of three
tabs: Input, Audio and Display. The Input tab (FIG. 28) enables you to select a source input and adjust its
audio and video settings. The following options appear on the Input tab:
FIG. 28 AMX DCS main screen
Input Tab Options
Active Input Click each button to view the corresponding audio and video settings for the
input device.
Audio Attenuation Use the slider to set the attenuation of the audio for the selected input. You can
preset the attenuation between the range of +24dB to -100dB.
Video Gain Use the sliders to set the red, blue, and green levels for the video output of the
selected input. You can set each individual level between 0 and 100%.
Video EQ Use the slider to set the equalization of the video for the selected input. You
can set the level between 0 and 100%.
Default Settings Resets the Audio Attenuation, Video Gain, and Video EQ to their default
values.
Highlighted port indicates
valid wallplate connection and type
Non-highlighted port
indicates no wallplate connection