Specifications

Wiring and Device Connections
5
Enova AVX-400 Cat5 Presentation Switcher Operation/Reference Guide
FIG. 6 diagrams the RJ-45 pinouts and signals for the Source Input connector and cable.
When connecting to a wall input plate, use Cat5/5e/6 cable to connect from the source input on the switcher to
the RJ-45 connector on the wall input plate (FIG. 7).
LINE IN
The LINE IN input is capable of delivering audio to mix into the program sound. This input is designed for use
with external audio equipment such as radio microphones and mixers. Connect the positive and negative
terminals for the left and right channels on the source audio input to the labelled wire terminals on the
switcher. The center terminal on the switcher accepts a grounding wire. For unbalanced sources, you can use
the R+, L+, and Ground connections (FIG. 9). You can connect a microphone to this input using a
preamplifier.
FIG. 6 RJ-45 wiring diagram
FIG. 7 Wall input plate connector
FIG. 8 LINE IN Input
Wall input plate RJ-45 connector