Specifications

Wiring and Device Connections
4
Enova AVX-400 Cat5 Presentation Switcher Operation/Reference Guide
Front Panel Components
The following sections describe the options on the front panel of the AVX-400.
Source Select Button (SELECT)
The AVX-400 includes one source select button you can press repeatedly to select one of the four input
sources. When you press the SELECT button, the first input source is selected. Pressing it again selects the
next valid input, and so on. The LED indicator beside the selected input turns on to show which source you
have selected.
Source Inputs (INPUTS 1-4)
The Source inputs can accept video from devices such as PCs, DVD players, satellite receivers, and video
conference systems. You can use the Source Input ports to connect Cat5/5e/6 cables to the port on a wall input
plate which then connects to an input device via composite, component, or RGB/VGA connector. The LED
beside each port lights red when its associated port is active.
The following table lists the pinouts, signals, and pairing associated with the Source Input connector.
FIG. 4 Source Select button
FIG. 5 Source Inputs
Use Cat5/5e/6 cable only for the source input connections. Using Cat5 crossover
cable may damage the presentation switcher.
Source Input RJ-45 Pinouts and Signals
Pin Signals Connections Pairing Color
1 R+ 1 --------- 1 1 --------- 2 Orange-White
2 R- 2 --------- 2 Orange
3 B+ 3 --------- 3 3 --------- 6 Green-White
4 G+ 4 --------- 4 Blue
5 G- 5 --------- 5 4 --------- 5 Blue-White
6 B- 6 --------- 6 Green
7 TX+ 7 --------- 7 7 --------- 8 Brown-White
8 TX- 8 --------- 8 Brown