Specifications
Programming
150972 7-43
7.8 Access Codes
You can edit the default User and Installer codes through this programming option.
To change a access code:
1. Enter the installer code.
2. Press to display the installer menu.
3. Select for Program Menu.
Display reads: ,QLWLDOL]LQJ
3OHDVHZDLW
4. Select for System Options.
5. Select the access code you wish to edit by pressing either (for User code) or
(Installer code).
6. Enter the new code (4 to 7-digits), then press .
7. Re-enter the same code, then press again to verify your original entry.
7
8
1 2