Specifications
Programming
150972 7-41
7.6 JumpStart Autoprogramming
To run JumpStart:
1. Enter the installer code.
2. Press to display the installer menu.
3. Select for Program Menu.
Display reads: ,QLWLDOL]LQJ
3OHDVHZDLW
4. Select for System Options.
5. Press the or arrow to select "Yes" from the warning screen.
6. Press .
IMPORTANT!
JumpStart is intended to be used prior to performing any custom programming. Each time
JumpStart is executed, all options will be reset to their default values. Do not run
JumpStart after you have configured the system through programming.
7
6