Specifications

Programming
150972 7-25
7.4.3.1 Assigning a Name to a Points
You can assign a name to a point to make it easier to recognize on a display.
If you wish to edit the name of a point, follow these instructions:
1. When the Display is flashing on the Edit Name field press .
2. Enter the number for the Name1or press the or arrow to select Name1. Refer to
Appendix B Table B-1.
3. Press .
4. Enter Number1 or press the or arrow to select Number1.
5. Press .
6. Enter the number for the Name2 or press the or arrow to select Name2. Refer to
Appendix B Table B-1.
7. Press .
8. Enter Number2 or press the or arrow to select Number2.
9. Press .
If you wish to bypass the Edit Name field press .