Specifications
Programming
150972 7-19
7.4 Point
You may need to change characteristics of individual input points (detectors and switches)
even after using JumpStart. This section explains how to change options for: type of input
point; latching/non-latching status (switches); and name and zone assignment of a point.
7.4.1 Point Programming For 5815 Module
To program for an 5815 Module points, follow these steps:
1. Enter the installer code.
2. Press to display the installer menu.
3. Select for Program Menu.
Display reads: ,QLWLDOL]LQJ
3OHDVHZDLW
4. Press to enter point menu.
5. Press the or arrows to select the desired module. refer to Section 6.5 Quick
Reference Table for available choices.
6. Press .
7. Enter the number of the point you wish to edit.
8. Press .
7
4