Specifications

Programming Overview

150972 6-11

3. Then press . The menus described in Section 7 of this manual will display. Section 6.5

of this manual is a quick reference listing all programmable options and JumpStart

defaults.

To Exit Program Mode:

When you have completed working with the menus, press (left arrow) several times until

you are exited from programming mode. Two prompts will display. The first prompt is to

make sure you intended to leave the Program Menu (select Yes or No as appropriate). The

second prompt is for accepting all changes. If you select No, any changes you have made

since you entered the Program Menu will have no effect.

* Installer Code factory-programmed as 5820.