Specifications

SLC Device Installation
150972 5-5
5.5 Input Monitor Module (SD500-AIM)
Wire and mount the SD500-AIM full-size input module as described in this section (see
Figure 5-5 and Figure 5-6). See Section 5.10.2 for information on how to use the on-board
dipswitch to select an address for the module.
Wire the monitor modules to the panel or to the 5815 as shown in Figure 5-5.
Figure 5-5 SD500-AIM/MIM Input Module Connection to the FACP (Class B)
5820
or
5815
SD500-AIM
SD500-MIM