Specifications
Model SK-4224 Fire Alarm Control Panel Installation/Operation Manual
3-6 151068
3.7 Assembly
The components listed in Table 3-1 are all packed with in the cabinet and require some
assembly. Follow these steps to assemble the components within the cabinet:
1. Remove keys from the envelope taped to the top of the cabinet.
2. Unlock the cabinet door.
3. Remove the packing material and the SK-4224 components.
4. Snap the bezel into the opening in the front of the cabinet. See Figure 3-3.
Note: The bezel will fit in only one way.
Figure 3-3 Assembly Diagram for the SK-4224
5. With the two #8 screws and nuts (with built in washers), mount the transformer in the
holes in the upper left hand corner of the cabinet. See Figure 3-3.
6. With the three self-tapping screws, mount the control board on the cabinet stand-offs.
Note: See Section 4 for transformer connections and battery connections.
Side View of
Slotted Stand-Of
f
Bezel Insertion
Transformer
Installation
CPU Mounting
Screws