Technical data

MCSi-64/84 Digital Brushless AC servo drive system - Ref.0707
Function: The OV10 variable contains the value of the output status of
the various functions that may be selected with OP14.
Valid values: 0 and 1.
Default value: 0.
Q group. Communication
Function: Determines the communications parameters of the UART
(Universal Asynchronous Receiver/Transmitter) of the 485
serial line of connector X1. For the service line USB-COM,
it is always configured as (9600, no parity, 8 data bits, 1 stop
bit).
Default value: 1540 (9600, no parity, 8 data bits, 1 stop bit).
To edit this parameter, the programming module has a
submenu like the one in the figure on the next page.
OV10 USER, RO DigitalOutputs
QP16 USER, RW SerialSettings
Bit Function
15, ..., 12 Reserved
11, 10 Stop bits
1 Stop bits
2 Stop bits
9, ..., 6 Data bits
7 Data bits
8 Data bits
5, 4 Parity bits
0 No parity
1 Even parity
2 Odd parity
3, ..., 0 Communication speed (baudrate)
0 2400 Bd 4 9600 Bd
1 3600 Bd 5 19200 Bd
2 4800 Bd 6 38400 Bd
3 7200 Bd