Technical data

Digital Brushless AC servo drive system - Ref.0707 MCSi-45/84
The first time the unit is connected to the PC, the operating system will show
two messages indicating that “new hardware has been detected”.
When starting the WinDDSSetup application, you must select the virtual COM
port in order establish communication with the unit.
To obtain information on the generated COM port, proceed as follows:
 Click the right button of the mouse on the icon <My PC>.
 Select the <Properties> option and the <Hardware> label in the next popup
window
 Select <Device administrator>.
The window will show them as:
 Multiple serial port adapters, the reference MOTION CONTROL INNOVA
 Ports (COM & LPT), reference USB-Serial Port (COMx). The digit
appearing in the x position refers to the new virtual COM port for the PC.
Do the <default> installation, recommended by the system and ignore the
message regarding the incompatibility tests of the software with the
operating system Windows® XP that comes up during the installation
process. Go on by pressing the <Continue> button. This message refers to
the drives that have not been certified yet. However, they are fully functional.