User`s manual

32
Lift away the chassis without forgetting to disconnect the linking cables 1 and 2 connecting the
power supply board located at the bottom of the case to the upper board fixed on the chassis.
10.2 REMOVING THE LID
To unclip the lid of the case, apply vertical pressure to the back of the lid while holding it.
To refit the lid, locate the hinges in their recesses
and press hard from the back to the front of the
lid until it clicks into place.
10.3 OPENING THE CASE
To open, first remove the lid, then use the allen key which is in the pouch in the lid of the
case. Unscrew the six screws holding the chassis located under the case.