User`s manual

26
6. CONNECTION ACCESSORIES
Pair of 10 A clamps (one red and one black) supplied with the instrument.
reference:P01. 1017-94
spade clips with 6 mm opening
length 3 m
section 4 mm
2
Pair of miniature Kelvin clamps 1 A max (one red and one black).
reference : P01.1017-83
2 plugs Æ 4 mm
Pair of dual prods 1 A max (one red and one black).
reference : P01.1017-82
length 3 m
section 0.75 mm
2
2 plugs Æ 4 mm
length 3 m
section 0.75 mm
2
7. INDICATORS
7.1 BATTERY (see 6 p.25)
■■
■■
■ LOW
The battery voltage is permanently checked. When it is getting low, the flashing red «LOW»
indicator warns the user that there is only enough power for a few measurements. It
becomes urgent to charge the battery. If the user reaches the limit of battery use, the red
«LOW» light stops flashing, the instrument is out of service and will not make any more
measurements. It is then essential to recharge the battery. Once the battery is recharged,
press the ON/OFF button twice (see 3 p.24) to switch on the instrument again.