Installation guide

74 DLOAD10
After opening the „Modem” window, select the corresponding modem type or click
on the „! Change” button to enter data according to the documentation of your
modem. Entering a new name and initialization path, and confirming it with the
„OK” button makes it possible to add new settings to the list of modems. After
clicking on the „! Change” button you can also change the communication port
number and the maximum transmission rate.
The „9Test” button permits checking interaction between the modem and the
program – it opens a window containing information on modem initialization.
Having properly initialized the operation, close the configuration windows.
Figure 15. –
Dialog boxes in DLOAD10 program.
In order to start communication in local mode, follow instructions attached to the
service function FS-112.