Specifications

IMPORTANT: You may find an enabled
channel that is not in your channel plan. This
should be disabled. A channel may be missed
if the frequency is special or level too low
(<10dBmV).
IMPORTANT: You must enable a channel to
perform measurements on it.
Channel Plan Parameters/Characteristics to edit
The Configure- Edit Channel screen lists the following
parameters/characteristics:
• ENABLED
• TYPE
• FREQ (MHz)
• CHANNEL NUMBER
• LABEL
• CARRIER
• CENTER FREQ (MHz)— Digital
• MEAS BW (MHz)— Digital
• PACKAGE
• TAGGED
• SCRAMBLED
1-29