Specifications

Users Manual: MD-CP42AUPG-MED

Division Canvys

WARNING:

Personal Injury — Medical electrical devices may be connected to other

devices or to parts of systems only when it has been made certain that there

is no danger to the patient, the user, or the environment as a result.

In those instances where there is any element of doubt concerning the safety

of connected devices, the user must contact the manufacturers concerned or

other informed experts as to whether there is any possible danger to the

patient, the operator, or the environment as a result of the proposed

combination of devices.

Connecting medical electrical devices to other medical electrical devices

and/or other non-medical electrical devices creates a medical system which

must comply with the system standard

EN 60601-1-1 / cUL 60601. Before putting the system into service, a

specialist is required to ascertain its conformity with the system standard.

WARNING:

Personal Injury — Before putting the device into service, check all cables for

signs of damage. Damaged cables must be replaced immediately with the

original manufacturer’s cables. The safety information and certificates do not

apply when cables from other manufacturers are used.

Do not open the flat-screen display or perform any service interventions. This

may render your warranty claims null and void. Only authorized technicians

are permitted to service the flat-screen display.

Do not put the flat-screen display into service

- when liquids have entered the device,

- when it was dropped and the housing is damaged.

Do not immerse the devices into liquids.

- Disconnect the power supply from the power line before cleaning. Use a

moist cloth.

WARNING:

Equipment Failure — Magnetic and electrical fields are capable of interfering

with the proper performance of the devices. For this reason make sure that all

devices operated in the vicinity comply with the relevant EMC requirements.

X-ray equipment, MRI devices, radio systems, and cellular telephones are

possible sources of interference as they may emit higher levels of

electromagnetic radiation.

Keep the system away from these devices and verify its performance before

use.