Specifications

Users Manual: MD-CP42AUPG-MED

Division Canvys

For intended use the monitor has to use in landscape mode, portrait mode is not an

intended use.

The user has to make sure that requirements from IEC 60601-1 are fulfilled, especially in

combination from monitor with other electrical equipment. For fulfillment of this technical

requirement you can use if necessary the earthing equipment conductor, which is fixed

mounted at the monitor.

The MD-CP42AUPG-MED display is a medical device as defined in the Council Directive

93/42/EEC about medical devices and is class I equipment (MDD).

Functional Description

The medical flat-screen display is built into a slim and ergonomic housing. The monitor

displays 16.7 Million colors with a resolution of 1920x1080 pixels.

The display is controlled either analog via a 15-pin D-sub VGA signal cable, digital via a

DVI cable or a HDMI signal cable. Different video Inputs allow to control the monitor. The

signal is equivalent to the analog and digital standard signals of your PC. After

connection of the signal the flat-screen display automatically adapts, as far as possible,

to the VGA signal and presents a stable and centered image. Additional display

parameters, such as brightness and contrast, can be adjusted via the on-screen menu.

Product Features MD-CP42AUPG-MED

• 42“ TFT Liquid Crystal Display

• protection glass

• high brightness

• high contrast ratio

• RS-232 connector for remote control

• IR remote control

• Earthing equipment conductor

• power management

• viewing angles

horizontal -89° up to +89°

vertical -89° up to +89°

• Optimum resolution 1920 x 1080 (Full HDTV)

• 16.7 million colours

• VGA-, DVI-and HDMI input

• S-Video, Composite Video, RGBS, YPbPr/YCbCr, HD-

SDI

• user-friendly OSD-Menu with intuitive wheel-knob,

IR remote control or

with PC by RS-232 communication

• DDC2B Plug & Play