Specifications

Users Manual: MD-CP42AUPG-MED
© 2011 Richardson Electronics GmbH
Division Canvys
26
2.3 Source switching (ID=0x04)
command 05 04 04 00 CK - select DVI-I Analog Input.
command 05 04 04 01 CK - select DVI-I Digital Input.
command 05 04 04 02 CK - select DVI-D Digital Input.
command 05 04 04 03 CK - select S-Video Input.
command 05 04 04 04 CK - select Composite Input.
command 05 04 04 05 CK - select YPbPr/YCbCr Input.
command 05 04 04 06 CK - select RGBS Input.
command 05 04 04 07 CK - select SDI Input.
reply: 03 0C F1 -ack.
2.4 Brightness control (ID=0x10)
command 05 04 10 DD CK -control Brightness value(from 0x00-0x64) if color mode
!= DICOM Mode
reply: 03 0C F1
2.5 Contrast control. (ID=0x11)
command 05 04 11 DD CK -control Contrast value(from 0x00-0x64) if Color mode is
normal mode
reply: 03 0C F1
2.6 ALS ON/OFF(ID=0x0C)
command 05 04 0C 01 CK - ALS ON
command 05 04 0C 00 CK - ALS OFF
reply: 03 0C F1
PS:if Color Mode=DICOM Mode or if Color mode=Calibration mode ALS always ON
2.7 Scaling Control(ID=0x09)
command 05 04 09 00 CK - set to 1:1.
command 05 04 09 01 CK - set to Aspect.
command 05 04 09 02 CK - set to FULL.
reply: 03 0C F1
2.8 PIP/SWAP Control(ID=0x08)
command 05 04 08 00 CK - set to PIP_OFF.
command 05 04 08 01 CK - set to PIP_ON.
command 05 04 08 02 CK - set to SWAP.
reply: 03 0C F1
2.9 POWER ON/OFF Control(ID=0x07)
command 05 04 07 00 CK - set to Power_OFF.
command 05 04 07 01 CK - set to Power_ON.
reply: 03 0C F1