Specifications
Users Manual: MD-CP42AUPG-MED
© 2011 Richardson Electronics GmbH
Division Canvys
17
Video-Setup Image Settings for the analog video inputs. For the digital inputs, this
function is not available.
X Main MADI Mode: Motion adaptive de interlacingt.
XNoise Reduction: X Dynamic NR Mode:Noise filter.
X MPEG NR Mode: Noise filter for compressed video
X Sharpness Noise Coring: small noise reduction
filter
XFilm Mode: Improvement for cinematic movie playing.
XDCDI: Directional Correlation Deinterlacing is a digital enhancement
method.
Menu Colour Mode
Selects the colour mode or colour temperature.
Exit Returns to Main Menu
Normal Adjust preset colour temperature of Cool, Neutral, Warm or User for
customized red, green and blue levels: The user can adjust and set
tones.
- R Adjust red and equivalent colours at the range from 0 to 100.
The greater the value is, the deeper the colour is, and vice versa.
- G Adjust green and equivalent colours at the range from 0 to 100.
The greater the value is, the deeper the colour is, and vice versa.
- B Adjust blue and equivalent colours at the range from 0 to 100.
The greater the value is, the deeper the colour is, and vice versa.
Gamma 1.8 Presetting for Gamma value 1.8
Gamma 2.0 Presetting for Gamma value 2.0
Gamma 2.2 Presetting for Gamma value 2.2
Gamma 2.4 Presetting for Gamma value 2.4
Monochrome Presetting for Gamma value Monochrome
Calibration Presetting for Gamma value calibration
DICOM Presetting for Gamma value DICOM (med. Standard)
PIP Settings
Settings for PIP / POP functions and its parameters.
Exit Returns to Main Menu
PIP Mode Switch between PIP and POP (Picture on Picture) und OFF Mode
PIP Channel VGA Select PIP Channel VGA (analog).
PIP Channel DVI Select PIP Chanel DVI-Input (digital).
PIP Channel HDMI Select PIP Channel HDMI-Input (digital).
PIP Channel S-
Video
Select PIP Channel S-Video-Input (Video).
PIP Channel CVBS Select PIP Channel CVBS Input.
PIP Channel
YPbPr/YCbCr
Select PIP Channel Component-Input
PIP Channel RGBS Select PIP Channel RGBS-Input
PIP Channel SDI Select PIP Channel HD-SDI-Input
PIP Position Set format and position of PIP Image
SWAP Swap main image channel and PIP Channel
PIP Image Change image settings of PIP channel