Specifications

Users Manual: MD-CP42AUPG-MED
© 2011 Richardson Electronics GmbH
Division Canvys
16
The Main Menu consists of followings menu points:
Exit Close the OSD screen
Input-Source Allows to select the input signals of the display: VGA, DVI, HDMI, S-
Video, Composite, Component, RGBS and SDI
Image Settings The picture menu allows to make changes of the picture
Color Mode Allows to select color mode or color temperature
PIP - Settings Allows to set PIP, POP parameters and settings
OSD - Settings Set the parameters for OSD (Language, Time etc.)
Management Contains several adjustments in order to change miscellaneous
properties of your display, e.g. Scaling, Recall etc.
Menu Input-Source
Select the Main-Input signal of your display.
Exit Returns to Main Menu
Analog VGA Select DVI 15-pin input signal (analog)
Digital DVI Select DVI 24-pin input signal (digital)
HDMI Select HDMI input signal (digital)
S-Video Select S-Video input signal (Video)
CVBS Select Composite (CVBS) input signal (Video)
YPbPr/YCbCr Select Component input signal (Video)
RGBS Select RGBS input signal (Video)
SDI Select HD-SDI input signal (Video)
Image - Settings
The picture menu allows making changes of the picture. Following sub menus are
available:
Exit Returns to Main Menu
Auto - Setup Automatic adjust of Image parameters
Brightness Set Brightness of the Image; Range: 0 means dark, 100 is bright
Black Level Adjust black level of the screen. The larger the value is, the brighter
the brightness of the background contrast is, and vice versa.
Adjustable at the range from 0 to 100.
Contrast Adjusts the contrast of the full screen at the range from 0 to 100.
Saturation Adjust saturation of the screen. The larger the value is, the more
intensive is the specific hue. Adjustable at the range from 0 to 100.
Hue Adjust gradation of colour. Adjustable at the range from 0 to 100.
Sharpness Adjust sharpness of the screen. The larger the value is, the outline
gets sharper. To make characters look sharper, set a large value. To
make pictures and images look finer, set a small value. Adjustable at
the range from 0 to 10.
Display Adjust the horizontal position of the display. When rotating Control
dial clockwise, the display moves to the left, and vice versa. For the
digital input DVI, this function is not available.
Adjust the vertical position of the display. When rotating Control dial
clockwise, the display moves upward, and vice versa. For the digital
input DVI, this function is not available.
Freqency/Phase Adjust the Frequency and phase of the display. Not available for
digital inputs. Set manually clock and phase