Specifications

Users Manual: MD-CP42AUPG-MED

Division Canvys

Controls & Functions

The OSD Wheel Knob

(On Screen Menu) The OSD Wheel Knob is a multi-functional device located on the right

side of the front bezel. It has three movements - rotate upward, rotate downward and

press inward as a button.

• Rotate Downward : Move Up/Right, Increase

• Rotate Upward : Move Downward/Left, Decrease

• Button Press : Execute, Do, Save

Illustration 3 – OSD Wheel Knob

Switch ON/OFF the flat-screen monitor with his power switch.

1. Switch-ON/OFF

Move monitor from standby to operation by pressing the OSD Wheel knob.

To switch-off the monitor press the OSD wheel knob two seconds until the

monitor will move to standby.

Handling of OSD-Menu

Press the OSD wheel knob, by switched-on flat-screen display, to overlay the OSD-Menu.

With the three functions from OSD wheel know you can make your adjustments within

the OSD-Menu.

- Rotate upward: moving upwards, move to right side, increase value.

- Rotate downward: moving downwards, move to left side, decrease value.

- Press button: Activate function, activate, store.

Mode Power consumption (only flat screen)

ON Approx. 250W

STANDBY Approx 25W

OFF