User`s guide

Section 6 – Displaying and Using the Point Description CONFIG Screens
6.2 Profit Optimizer’s DQP/RMPCT Configurations
74 Profit Optimizer User's Guide 1/00
Honeywell Inc.
6.2 Profit Optimizer’s DQP/RMPCT Configurations
Sample Screen
Figure 6-1 shows a sample Profit Optimizer’s DQP/RMPCT Configuration screen.
Your displays will show different tag names and descriptions.
Figure 6-1 DQP/RMPCT Configuration Display
Using the
Screens
• To Display the DQP/RMPCT Configuration Screens Select the optimizer
name in the optimizer control bar in the top left corner to open DQP Detail
Screen, then touch the number of Profit Controllers (RMPCTs) [SYSTEM
CONFIG] target at the upper right of the display.
• What You Can Do on This Screen Use this screen to enter Profit Controller,
RMPCT side interface, and Profit Optimizer (DQP) side interface point tag
names.
• For OPEN DQP with RMPCT(s) on separate LCN’s For RMPCT(s) which
reside on different LCN’s than DQP, only fill in the DQP Appl Side Interface
Point. Leave the RMPCT Controller Point and RMPCT Appl Side Interface
Point blank.